Menu
Your Cart

SAW BLADE TCT 260X2.5X30X60T WOOD PROF. PRO-TECH FES. KAPEX

SAW BLADE TCT 260X2.5X30X60T WOOD PROF. PRO-TECH FES. KAPEX
SAW BLADE TCT 260X2.5X30X60T WOOD PROF. PRO-TECH FES. KAPEX
  • Stock: In Stock
  • Brand: PRO-TECH
  • Model: PT26060-30
  • Weight: 0.78kg
  • Dimensions: 292.00cm x 298.00cm x 22.00cm
  • SKU: PT26060-30
  • UPC: 6009515856427
Products Sold: 0
Product Views: 22
R 2,013.08
Ex Tax: R 1,750.50

Saw Blade for Festool KAPEX Circular Saws

 

Carbide Tipped - Saw blade for circular saws - Crosscut

The SAW BLADE TCT 260X2.5X30X60T WOOD PROFESSIONAL is a high-quality, tungsten carbide-tipped blade, designed for fast and efficient wood cutting. Specifically engineered for compatibility with the Festool KAPEX miter saw, this blade is ideal for professional carpenters, woodworkers, and builders looking for a balance between precision and speed.

Benefits:

  • Fast and Efficient Cutting: The 60-tooth design strikes a balance between speed and precision, allowing for faster cuts without sacrificing too much on the finish.
  • Durable and Long-Lasting: The tungsten carbide-tipped teeth maintain sharpness longer, reducing the need for frequent blade changes and improving overall cost-effectiveness.
  • Smooth and Clean Cuts: Though designed for efficiency, this blade still produces smooth cuts with minimal splintering, reducing the need for sanding or post-processing.

The SAW BLADE TCT 260X2.5X30X60T WOOD PROFESSIONAL is an excellent choice for professionals who need a blade capable of delivering both speed and quality in wood cutting. Designed for the Festool KAPEX miter saw, it ensures precise, smooth cuts in various wood materials, making it versatile for a wide range of woodworking applications.

Pro-Tech. South African favourite for over 30 Years

Saw blade terminology

Arbor:
The shaft that turns the saw blade.

ATB:
Alternate Top Bevel. The tips on the saw blade bevels from left to right in sequence. Each tip has a sharp point that result in a clean, shear cut leaving a fine finish with minimal chipping. For use in plywood, veneer, particle board and wood.

Anti-kickback:
The gullet is shaped like a camel's hump, also called a limiter, to limit the amount of material that can safely be cut by each tooth.

Bore:
The center hole diameter of the saw blade.

Combination:
Circular saw blades that can be used both for crosscutting and ripping.

Crosscut:
A cut made across the grain of the wood. Cutting wood to length.

Dado:
A set of stacked blades designed to produce grooves.

Depth of cut:
The maximum depth of cut safely achievable determined by the power tool and saw blade diameter.

Diameter:
The outside of the saw blade measured directly accross from one tip to the other opposing tip.

Expansion slots:
Heat is generated with each cut due to friction. All saw blades have expansion slots in the body of the blade to have an outlet to release tension and warping.

Flange:
Falnges are used to clamp the saw blade to the arbor of the saw. Most of the time, the flanges cover more or less a third of the saw blade's diameter. It is important that the flanges are always clean to prevent warping and vibration.

Flat top grind (FTG):
Unlike the ATB, the tips are ground flat with a 0° top angle. The tips are more durable and longer lasting. Mostly used with rip saw blades.

Gullet:
The hollowed out shape between teeth that assists with chip clearance. Saw blades have different gullet designs. Mostly dependant on the material being cut.

Hollow ground:
The tips are concave shaped.

Hook angle/rake/pitch:
Forward angled tips tend to grab material, like a gouge carving into the material. Backward angled tips don't have grabbing at all, like a scissor cutting the material.

Kerf:
The width of cut.

Rip:
A cut made along the grain direction of the wood. Cutting wood to width.

Shim/bushing:
Depending on the bore of the saw blade and the arbor of the saw. A shim or bushing is available to adapt the saw blade to the arbor. No bushings or shims are available in Ø 22.23mm.

TCG:
Triple Chip Grind. A flat top tooth is followed by a trapezoidal tooth. Designed for saw blades to eliminate chipping in brittle materials like chipboard and laminated material.

Thin kerf:
The saw blades are slightly narrower than standard saw blades. A lot less power is needed to make cuts and it has a slightly lower material waste. Keep in mind to recalibrate the scale on table saws when fitting a thin kerf saw blade.

Features:

  • Optimized for Wood Cutting: Designed to cut a wide range of wood materials, including hardwoods, softwoods, plywood, and laminated boards. The 60-tooth configuration is optimized for fast, clean cuts while maintaining a smooth finish, especially in general-purpose woodworking.
  • Professional-Grade Performance: With 60 teeth, this blade is perfect for projects where both speed and quality are required. It is suitable for cutting wood for framing, decking, furniture making, and trim work.
  • Compatibility with Festool KAPEX: This saw blade is tailored for use with the Festool KAPEX miter saw, enhancing the saw's precision cutting capabilities, especially in miter and bevel cuts.
  • Reduced Vibration and Noise: The blade is designed to reduce vibration, ensuring smoother operation, less noise, and less strain on the user and saw. This also enhances the quality of the cut and extends the life of both the blade and the saw.

Applications:

  • Woodworking and Carpentry: Ideal for cutting wood in professional settings, whether for furniture making, cabinetry, or construction projects.
  • Framing and Decking: Suitable for larger cuts in framing lumber and decking, where speed is essential but a clean finish is still desired.
  • Crosscuts and Rip Cuts: Can be used for both crosscutting and ripping through wood, making it a versatile blade for various woodworking tasks.
consider safety for your health and the people around you

General safety suggestions:

It is advisable to always have the following items nearby and in a good condition

  • Eye protection – clean and scratch free
  • Hearing protection – quality earmuffs
  • Dust masks – discard old and dirty masks
  • Gloves – for easy handling of material and hand protection
Wear Gloves Eye Protection Hearing Protection Dust Mask
Wear Gloves
Eye Protection
Hearing Protection
Dust Mask

 

Key Specifications:

  • Diameter: 260 mm - The blade's overall diameter, compatible with the Festool KAPEX and other saws of similar specifications.
  • Kerf (Blade Thickness): 2.5 mm - A moderately thick blade, providing sturdy cuts while maintaining precision and reducing waste from material removal.
  • Bore Size: 30 mm - The center hole that fits onto the arbor of the saw, ensuring compatibility with the Festool KAPEX miter saw.
  • Number of Teeth: 60T - With 60 teeth, this blade offers a balance between speed and a smooth finish, making it versatile for both rip cuts and crosscuts.
  • TCT (Tungsten Carbide Tipped): Each tooth is tipped with tungsten carbide, providing extended durability, sharpness, and longevity, even when cutting through hardwoods.
Outside diameter Bore diameter Kerf Tooth count (Z) Grind
Ø 260mm Ø 30mm 2.5mm 60 ATB

Write a review

Note: HTML is not translated!
Bad Good

Unlimited Blocks, Tabs or Accordions with any HTML content can be assigned to any individual product or to certain groups of products, like entire categories, brands, products with specific options, attributes, price range, etc. You can indicate any criteria via the advanced product assignment mechanism and only those products matching your criteria will display the modules.

Also, any module can be selectively activated per device (desktop/tablet/phone), customer login status and other criteria. Imagine the possibilities.