Spot Weld
Brand: TORK CRAFT
Model: TCBP115-1
Backing pad for angle grinder
Backing pad to be used with an angle grinder with M14 thread.
DIA: 115mm
THREAD: M14
Hook & Loop: No
MAX RPM: 11,500
Application:
This is a backing pad for an angle grinder to use fibre discs.
The range of fibre discs can be viewed
here.
CAUTION:
Due t..
R 108.56
Ex VAT:R 94.40
Brand: TORK CRAFT
Model: TCBP115-2
Backing pad for angle grinder
Backing pad to be used with an angle grinder with M14 thread.
DIA: 115mm
THREAD: M14
Hook & Loop: No
DENSITY: Soft
MAX RPM: 11,500
Application:
This is a backing pad for an angle grinder to use fibre discs.
The range of fibre discs can be viewed
here.
C..
R 102.47
Ex VAT:R 89.10
Brand: TORK CRAFT
Model: TCBP115-3
Backing pad for angle grinder
Backing pad to be used with an angle grinder with M14 thread.
DIA: 115mm
THREAD: M14
Hook & Loop: No
DENSITY: Hard
MAX RPM: 11,500
Application:
This is a backing pad for an angle grinder to use fibre discs.
The range of fibre discs can be viewed
here.
C..
R 107.01
Ex VAT:R 93.05
Brand: TORK CRAFT
Model: TCBP150C
Backing pad
Rubber backing pad to be used with a drill
DIA: 150mm (6')
HOLES: No
ARBOR: &O/;6mm
Hook & Loop: No
Application:
This is a backing pad for fibre discs or polishing bonnets. The backing pad
is fitted with an arbor to be used with electric or cordless drills.
The rubber is ..
R 108.68
Ex VAT:R 94.50
-27 %
Brand: TORK CRAFT
Model: TCBP178-1
Backing pad for angle grinder
Backing pad to be used with an angle grinder to polish stone.
DIA: 100mm
THREAD: M14
Hook & Loop: No
MAX RPM: 8,600
Application:
This is a backing pad for an angle grinder to use fibre discs.
The range of fibre discs can be viewed
here.
CAUTION:
Due to t..
R 94.99 R 129.49
Ex VAT:R 82.60
Brand: TORK CRAFT
Model: TCPS3504
Flange spanner
Application:
A flange spanner is used to remove the outer flange on an angle grinder to
replace or change the abrasive grinding disc.
The measurements of the pins on the flange spanner is: 35 x &O/;4mm....
R 87.17
Ex VAT:R 75.80
Brand: TORK CRAFT
Model: TCPS3505
Flange spanner
A flange spanner is used to remove the outer flange on an angle grinder to
replace or change the abrasive grinding disc.
The measurements of the pins on the flange spanner is: 35 x &O/;5mm....
R 114.31
Ex VAT:R 99.40
Brand: TORK CRAFT
Model: SPC00051
Adaptor for a polisher
Thread: M14 Male - &O/;8mm
spindle
Application:
The adaptor is used to connect a drill with a 3 jaw chuck to a M14 polishing
backing pad. Eg.
SPC00106.
DEFINITION:
M - ISO metric screw thread.
....
R 65.03
Ex VAT:R 56.55
Brand: TORK CRAFT
Model: SPC00052
Adaptor for a polisher
Thread:
M14 Male - M14 Female
Application:
The adaptor is used to extend the spindle shaft on a polisher. Some adaptors
have different threads on either end. These adaptors are mostly used to change
an imperial thread to a metric thread.
DEFINITION:
M - ISO metric..
R 78.26
Ex VAT:R 68.05
Brand: TORK CRAFT
Model: SPC00053
Adaptor for a polisher
Thread: 5/8' BSP Male - M14 Female
Application:
The adaptor is used to extend the spindle shaft on a polisher. Some adaptors
have different threads on either end. These adaptors are mostly used to change
an imperial thread to a metric thread.
DEFINITION:
BSP - Briti..
R 78.26
Ex VAT:R 68.05
Brand: TORK CRAFT
Model: SPC00054
Adaptor for a polisher
Thread: 5/8' UNC Female - M14 Male
Application:
The adaptor is used to extend the spindle shaft on a polisher. Some adaptors
have different threads on either end. These adaptors are mostly used to change an
imperial thread to a metric thread.
DEFINITION:
M - ISO..
R 78.26
Ex VAT:R 68.05
Brand: TORK CRAFT
Model: SPC00055
Adaptor for a polisher
Thread: 5/8' BSP Male - 5/8' BSP Female
Application:
The adaptor is used to extend the spindle shaft on a polisher. Some adaptors
have different threads on either end. These adaptors are mostly used to change
an imperial thread to a metric thread.
DEFINITION:
BSP - ..
R 78.26
Ex VAT:R 68.05