Brand: PRO-TECH
Model: KP4302
Arbor
Arbor - Slot cutter
Use this arbor fitted with a slot cutter where a groove (slot) is required on the side of wood with a specific set cutting height.
This router bit has a 12.7mm shank (shaft) that will fit most large routers with the correct collet. Please ensure tha..
R 989.46
Ex VAT:R 860.40
Brand: PRO-TECH
Model: KP49570
Panel
Mould Round Over bit
Carbide
Tipped
These cutters are primarily designed to produce panel moulds on cabinet doors and drawer fronts in the
furniture industry. Make round-over shaped panels for any project by routing grooves on the face of the panel.
They may also be used f..
R 641.53
Ex VAT:R 557.85
Brand: PRO-TECH
Model: KP4MM-2
Double
flute Straight bit
Solid
Carbide
In
choosing a straight bit for any application, always select one with the shortest
cutting edges and the shortest overall length that will reach the required cut depth.
Excessive length intensifies deflection and vibration, which degrade cut q..
R 437.98
Ex VAT:R 380.85
Brand: PRO-TECH
Model: KP5
Spindle
cutter - Full bead/Half round/Bull nose 3/4'
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter can be configured to cut full beads, ½ rounds or a bull nose.
KP800020 - ..
R 1,241.37
Ex VAT:R 1,079.45
Brand: PRO-TECH
Model: KP501011
Keyhole or hang slot cutter
Keyhole cutter 9.58mm wide
This bit is so different from the usual 'edge treatment' bits that it deserves highlighting.
It is a highly specialised bit that is used for one purpose only, to cut keyhole slots in picture frames or any object you would like to han..
R 273.41
Ex VAT:R 237.75
Brand: PRO-TECH
Model: KP520411
Finger joint router bit
Carbide Tipped
- Finger joint
The router bit is a counter profile bit designed to join the end grains of wood.
The cutter set is designed to be used in a router table.
This router bit has a 12.7mm shank (shaft) that will fit most large routers with the ..
R 2,162.52
Ex VAT:R 1,880.45
Brand: PRO-TECH
Model: KP532011
Tongue & Groove - Parallel
Carbide
Tipped - Tongue & Groove (Parallel)
The cutter is a type of cutter known as a counter-profile cutter. When
properly aligned, it will allow two panels to join together without the use of a
secondary cuttter. The F-profile assists with alignment duri..
R 1,426.29
Ex VAT:R 1,240.25
Brand: PRO-TECH
Model: KP532411
Tongue & Groove - Parallel
Carbide
Tipped - Tongue & Groove (Parallel)
The cutter is a type of cutter known as a counter-profile cutter. When
properly aligned, it will allow two panels to join together without the use of a
secondary cuttter. The F-profile assists with alignment duri..
R 1,545.26
Ex VAT:R 1,343.70
Brand: PRO-TECH
Model: KP53802
Finger grip bit
Carbide
Tipped
This finger grip router bit produces clean and modern cabinet, kitchen door and chest
pulls, totally uninterrupted by hardware providing a positive grip that is easy on the
fingers. A must-have in any cabinetmaker’s workshop.
Eliminate hardware!
This..
R 826.33
Ex VAT:R 718.55
2-3 Days
Brand: PRO-TECH
Model: KP542411-1
REPLACEMENT 3.2MM CUTTER FOR THE V JOINT TONGUE & GROOVE ASSE....
R 441.43
Ex VAT:R 383.85
Brand: PRO-TECH
Model: KP551
Rail & Stile cutter
Carbide Tipped
- Ogee
The cutter set contains both the rail and stile cutters to create the frame of a cabinet door with an ogee profile.
The cutter set is designed to be used in a router table.
This router bit has a 6.35mm shank (shaft) that will fit most sma..
R 1,335.15
Ex VAT:R 1,161.00
